Case study of intelligent industrial sand table model production

The production of intelligent industrial sand table models realistically reproduces the overall picture of industry. In recent years, the development of industrial planning has been rapid, and the development of cities has also been rapid, especially the urban changes in new areas. Citizens who come to the new area to buy houses will come to the exhibition hall to learn about the future planning of this new urban area. And professional knowledge such as urban planning, which originally appeared very "high-end" in the eyes of citizens, is now more easily understood through vivid and interesting descriptions in the exhibition hall. How the current city is planned and what it will become in the future are all visible to the citizens in the exhibition hall.

Maintenance method of intelligent industrial sand table model

Due to the special nature of the material of the mechanical model, its maintenance is particularly important. When maintaining the mechanical model, check the relationship between the parts and whether there is any damage, repair the damaged parts, check for air leakage in the pneumatic top material, and take measures for specific situations.

On mechanical models, water stickers are relatively fragile and can easily dry and crack over time. Therefore, when the model is placed for a long time, the water stickers should be wrapped in food wrap. Put it in the refrigerator and take it out when needed. If the water sticker dries and cracks, you can dilute it with model paint, spray it on the water sticker, and repeat the spraying several times to repair it.

When replacing a damaged trachea, it is necessary to focus on tracking and testing several important components of the mechanical model. The function of the ejector and guide components is to ensure the opening and closing movement of the model and the ejection of the plastic parts. If any part of the mechanical model gets stuck due to damage, it will cause production to stop. Therefore, it is necessary to regularly maintain lubrication of the model ejector pin and guide post, and regularly check whether the ejector pin, guide post, etc. have deformation and surface damage. Once discovered, they should be replaced in a timely manner; After completing a production cycle, professional rust proof oil should be applied to the working surface, motion, and guiding components of the mechanical model. Special attention should be paid to protecting the bearing parts of the gear and rack model and the elastic strength of the spring mechanical model to ensure that it is always in the best working state.

As production time continues, the cooling channel is prone to sedimentation of scale, rust, sludge, algae, etc., which reduces the cross-sectional area of the cooling channel and narrows it, greatly reducing the heat exchange rate between the coolant and the model, and increasing the production cost of the enterprise. Therefore, the cleaning of the channel should be taken seriously; For hot runner mechanical models, maintenance of the heating and control system is particularly important as it helps prevent production failures from occurring.